All of our lightning protection systems that that we design or install shall not deviate from the standards set in place by Underwriters Laboratories (UL96A), Lightning Protection Institute (LPI-175), and the National Fire Protection Organization (NFPA 780). Our promise is to ensure that any lightning protection system, we are included in, will be completed with the confidence that certification will be achieved.
These systems that we sell and design are made to meet or exceed the following standards: NFPA780, UL96A, and LPI-175. We are always moving forward to better serve our customers, keeping current with changes made within the standards, supplying quality products and tech support.
Kuefler Lightning Protection Systems: Protecting Life and Property.
Roofing Warranty and Lightning Protection System Verification
The following must be approved before the lightning protection system can be installed. Please feel free to reach out for further clarification.
Roofing Warranty and Lightning Protection System Verification:
Lightning protection system work cannot begin until the information in this note is verified by the roofing contractor or roofing manufacturer. Our estimate is based on roof mounted lightning protection equipment being adhered or mechanically fastened directly to membrane, shingles, tiles, metal roofing, etc. Any variance or special provisions dictated by roofing manufacturer to maintain roofing warranty to be furnished and installed by roofing contractor (i.e., additional membrane strips, pavers, flashings, heat welded straps, standing seam clips, adhesive, etc.) Please note that lightning protection conductor supports must be a UL listed component, heat welded roofing straps are not an accepted form of conductor fastener. Because there are so many different styles of standing seam roofing types, metal roofings requiring a specific type of standing seam clamp that is not manufactured by the lightning protection material manufacturer to maintain roof warranty to be at an additional cost.